How Do You Restore a Faded Metal Roof?

Estimated read time: 5 minutes
A Contractor Applies a Roof Coating.

How do you restore a faded metal roof?

As durable as metal roofs are, as they age and the sun beats down on them, they are susceptible to problems ranging from rusting to fading. Metal roofs fade primarily because day after day they bake in the sun, and the heat cooks off the top layer of paint. With many businesses, the roof’s color can define the business and the building. One of the best ways to prevent fading and other problems like rusting is metal roof restoration. This means you add a protective coating on the roof that keeps it from fading and makes it look like new. Coatings are highly reflective, so they’ll keep the roof cooler and improve energy efficiency. Moreover, they seal up small holes and protect the roof from leaks and your roof’s life will be extended.

If you want to stop your roof from fading, improve energy efficiency, and protect your roof from leaks, you may want to consider metal roof restoration in New Orleans, LA. ECO Commercial Roofing offers a wide range of restoration solutions for metal and other commercial roofs. You can learn more by calling 877-406-7663.

How often do metal roofs need to be replaced?

Besides requiring little maintenance, one of the biggest appeals of metal roofing is the fact it lasts longer than most other commercial roofing systems like flat roofs. You can expect a metal roof to last 40 to 60 years or longer, although as it ages it will be subject to problems like fading and leaks as well as rusting. As these problems increase, you’ll have to determine whether you want to replace your metal roof or choose an option like metal roof restoration. Many building managers choose the restoration option because it is cost-effective and will extend your roof’s life for as much as a decade or more. 

How can I make my metal roof look new?

As metal roofs sit in the sun day after day and endure every sort of weather condition from snow and ice to hail and high winds, they get worn and can fade or rust. Leaks can develop, and if hail has struck, there may be dents all over it. You may have to make repairs or replace seriously damaged panels, and these repairs can improve your roof’s appearance. You can also repaint your roof, but this only means the roof will fade again after a few years. One solution you can choose is metal roof restoration. This is a much more cost-effective option than replacing your roof, as the restoration just requires you to add a coating over the roof. This coating will protect your roof from fading and leaks, cool it better, and make it look like new. 

How to apply metal roof coating

Metal roof restoration is actually an easy process that is unlikely to disrupt your business operations while it’s being applied. At the very most a restoration can take about three days. The process goes like this:

  • The roof is cleaned and cleared of debris. This can be done with a push broom, blower, or even a power washer on low pressure.
  • Repairs are made. Leaks and other damage needs to be repaired before the coating is applied.
  • The coating is then applied. Most coatings are either sprayed or rolled on. Preferably the coatings should be applied at temperatures 65 degrees or above on a clear day.

Is it OK to pressure wash a metal roof?

While metal roofs are low maintenance, one maintenance service that should be performed regularly is keeping the roof clean and free of debris. When most roofs are cleaned, you can use a power washer to clean them. You can also use a power washer on a metal roof but it needs to be done on low pressure. A hot water pressure washer can also be used. Use a 40-degree tip when washing. 

In terms of cleaning your roof, you may be wondering “What is the best cleaner for metal roofs?” For the most part, you don’t often need any special cleaner for a metal roof. Water and detergent usually work just fine. Whenever you are preparing for a metal roof restoration, cleaning the roof is always the first step.

Metal roof restoration tips

While metal roof restoration is a relatively simple process, some preparation needs to be undertaken that will help the process go smoothly. 

Here are some things to do to make the process go as smoothly as possible.

  • Inspect the roof for rust and remove it using a wire brush, sand blasting, or acid etching.
  • Clean the roof. You can normally safely power wash the roof on low pressure.
  • Make sure all the fasteners are tightened, replacing any that are missing, and the substrate is secure.
  • Seal any exposed fastener head as well as seams that wider than a one-eighth inch.
  • Before applying the coating, make one last effort at cleaning the roof using a brush or blower.

Metal roof elastomeric coating

Elastomeric coatings are the most commonly used for metal roof restoration. Aluminum coatings are also used although the elastomeric coatings tend to have a better reflectivity rating, which is important if energy efficiency and cooling your building are concerns. These coatings also tend to be more aesthetically appealing than aluminum.

A Metal Roof Coating is Applied.

Metal roof restoration near me

If you are opting for metal roof restoration in New Orleans, LA, you’ll want a team with superior expertise in the process. You’ll find that with the team at ECO Commercial Roofing. We offer a full range of coating options. Get a quote from us by calling 877-406-7663.

Related Articles

Table of Contents

  • We’ll Keep Your Details Private. Request Your Quote Worry-Free.